|
|
Post by b2bomer on Mar 8, 2013 21:42:05 GMT -6
Here s pic of all the crap I removed from the B2.. and I weighted it today.. 3680lbs Thats what I'm talking about.   |
|
|
|
Post by Ryan Padgett on Mar 9, 2013 8:41:35 GMT -6
wanna do some wiring contraptions on my blazer? i hate electrical lol
|
|
|
|
Post by b2bomer on Mar 9, 2013 8:50:38 GMT -6
what do you want to do to it?
|
|
|
|
Post by b2bomer on Mar 9, 2013 16:21:40 GMT -6
more pics.. Lights under the hood!!  Dual battery trays..   Why I NEED a bumper..  Lights under the dash..  Lower hose close to the sway bar, so I dropped it..  Dash with new wheel..  |
|
|
|
Post by Ryan Padgett on Mar 11, 2013 8:44:54 GMT -6
what do you want to do to it? i think its all going to be run off a switch panel mostly, but putting the 87 harness/fuse panel into the 72 cab. engine harness came out easy as well as the rest of it so we salvaged all the necessities. this build is going well chris. you should be fine without that sway bar. it will help flex tremendously but take your time getting used to driving without it. dont go around corners at 50mph lol |
|
|
|
Post by b2bomer on Mar 11, 2013 23:24:26 GMT -6
|
|
|
|
Post by Ryan Padgett on Mar 12, 2013 9:53:09 GMT -6
thats pretty slick. are you going to add a stinger?
|
|
|
|
Post by b2bomer on Mar 12, 2013 22:50:49 GMT -6
yelp, already have it made, and I got my top plate made today. Waiting on the winch then it all goes together..
|
|
|
|
Post by Ryan Padgett on Mar 13, 2013 9:35:39 GMT -6
right on
|
|
|
|
Post by chrispadgett on Mar 14, 2013 11:47:22 GMT -6
Looks good man. Like the bumber design.
|
|
|
|
Post by b2bomer on Mar 15, 2013 20:01:47 GMT -6
Thanks, it will be better when the winch,D ring hooks and stinger.
|
|
|
|
Post by Ryan Padgett on Mar 20, 2013 11:10:29 GMT -6
looks even better in person. saw it the other day at your shop when i picked up the 2x4 from Sy. I like it!
|
|
|
|
Post by b2bomer on Mar 21, 2013 8:16:04 GMT -6
Thanks, The winch will be here today.. Time for more building!
|
|
|
|
Post by chrispadgett on Mar 21, 2013 10:35:45 GMT -6
What winch did you get?
|
|
|
|
Post by b2bomer on Mar 22, 2013 23:44:28 GMT -6
I got the Smittybuilt 8K for $299 shipped to my door and a free cover!  Moved the trany cooler back a little to help.  This is the solenoid for the winch and I dont want to set it on top or out front. so I removed the cove and now where to pit it.  Here might work.. I'll just open up the hole as bit and put some hose around it and YES!  Make a bracket..  Test fit and where it sits to the 2nd battery just for the winch..   Also trimmed out the center of the flaring and grill. I made some stand offs so it wouldn't flop in the wind!  Grill on and all tucked away. I'm going to coat the terminals ends with a rubber coating to keep them dry and clean.  so far looks good, more to follow tomorrow...  |
|
