|
|
Post by chrispadgett on Nov 28, 2012 13:48:19 GMT -6
www.barnes4wd.com/Heavy-Duty-Flush-Mount-Shackle-Hanger-Pair_p_111.htmlthose wont be what you want to do. your going to want to just move shackle mount forward in frame with new bushing mount/hole. And on to the seats. your going to want to just make the mounts out of tube and tie them into the cage. so you can just use the sliders that come with the seats.
|
|
|
|
Post by Ryan Padgett on Nov 28, 2012 14:07:06 GMT -6
so just weld the sliders to the tube? was kinda wanting the seats a decent amount away from the cage to have some flexibility in reclining and movement and to have plenty of adjustability in the harnesses since they will be tied into the cage
|
|
|
|
Post by Ryan Padgett on Nov 28, 2012 14:10:51 GMT -6
|
|
|
|
Post by Ryan Padgett on Nov 28, 2012 14:13:49 GMT -6
|
|
|
|
Post by chrispadgett on Nov 28, 2012 15:51:59 GMT -6
yes and yes on the second post. on the first post your over thinking the seats. Your just going to run tubes side to side and mount the sliders to the tubes with tabs. You can mount the seats wherever the fuck you want. Dont overthink it. Do more research
|
|
|
|
Post by Ryan Padgett on Nov 28, 2012 16:35:25 GMT -6
that works. i'm planning on starting to tear the thing down this weekend since its going to be nice. hope to maybe have the body mostly apart saturday and start thinking up an idea on frame bracing etc. sunday and possibly start measuring out how much tube i'll need and maybe start getting crap ordered as time goes by
|
|
|
|
Post by chrispadgett on Nov 28, 2012 17:22:26 GMT -6
|
|
|
|
Post by chrispadgett on Nov 28, 2012 17:25:25 GMT -6
|
|
|
|
Post by b2bomer on Nov 28, 2012 21:59:51 GMT -6
Dont forget to post pics... this is going to be good!
|
|
|
|
Post by Ryan Padgett on Nov 29, 2012 0:08:15 GMT -6
Will do. I didn't get enough pics of the last stage of transformation but this one will be frame up so definitely gonna take some
|
|
|
|
Post by chrispadgett on Nov 29, 2012 13:37:33 GMT -6
|
|
|
|
Post by chrispadgett on Nov 29, 2012 13:42:49 GMT -6
|
|
|
|
Post by Ryan Padgett on Nov 29, 2012 15:05:26 GMT -6
they make those scat seats that recline?
|
|
|
|
Post by Ryan Padgett on Nov 29, 2012 15:14:13 GMT -6
|
|
|
|
Post by Ryan Padgett on Nov 29, 2012 15:20:02 GMT -6
www.youtube.com/watch?v=_P1MBhBjiqIthats a bad machine lol the affordable bender seems ok. would think theyre affordable notcher would be cheaper than the jd2 notcher though instead of the same price
|
|
